Our display cabinets come with all the necessary wall mounting hardware. Follow the instructions below for step-by-step instructions on hanging your display cabinet on the wall with the included Tear-Drop brackets.
Parts:
- 1 Packet of Mounting Hardware
- Left & Right Tear-Drop L-shaped brackets
- 8 Small screws
- 2 Wall anchors
- 2 Large screws
- A set of keys (for your display cabinet)
Step 1: Decide if you will be hanging the display case vertically or horizontally.
Many of our display cabinets are versatile and can be hung vertically or horizontally. Decide which orientation you are hanging yours. Pictured here is our 5 Baseball Bat Display Case.
Step 2: Install the Tear-Drop brackets to the cabinet.
Install the left and right Tear-Drop brackets to the top corners of the back of the cabinet with the provided 8 small brass screws, (see photo below). There are pre-drilled holes to match the bracket holes.
Step 3: Measure the distance and install the screws into the wall.
With a measuring tool, measure the distance between the 2 holes of the left and right Tear-Drop brackets.
After locating where you will be displaying the cabinet, measure out the same recorded distance onto the wall. It is important that your measurement is accurate as this will make the attachment easier to align.
Into the wall, install the 2 large black screws. Use the plastic hollow wall anchors if your wall material requires.
Step 4: Hang the cabinet on the wall!
To hang the cabinet on the wall, simply position the cabinet over the top 2 screws and align with the holes of the Tear-Drop brackets. Slide down the case and rest it on the brackets.
Download the printable pdf of these instructions here.
